Skip to main content

Virtana Service Observability agent on Linux

You can install and configure the About Streaming data to collect data from your Linux hosts and stream it directly to Virtana Service Observability. You can use the non-interactive installation method so you can easily automate its distribution to hosts throughout your environment. The Virtana Service Observability agent can be installed on a real or virtual Linux host that uses Debian or the Red Hat package management system.

After installation, you can configure and manage the agent and collect metrics for your Linux hosts.

Installation process

During the non-interactive installation of the data monitor agent, the installer is supplied with a text file containing variables and parameter values that provide answers to the installer prompts, including the license agreement.

The non-interactive installation process includes the following tasks:

  1. Review hardware and software requirement as well as permissions.

  2. Download the Debian-based or Red Hat-based distribution file.

  3. Review and accept the license agreement | Debian| Red HatInstall the Virtana Service Observability agent on Red Hat-based Linux hosts

  4. Select datasources Debian| Red HatInstall the Virtana Service Observability agent on Red Hat-based Linux hosts

  5. Set Virtana Service Observability API variables Debian| Red HatInstall the Virtana Service Observability agent on Red Hat-based Linux hosts

  6. Start installation Debian| Red HatInstall the Virtana Service Observability agent on Red Hat-based Linux hosts

Before you begin

Before you begin installing the Virtana Service Observability agent on a real or virtual Linux host, be sure that you meet the following requirements.

To install and manage the agent, you will need to meet the following hardware requirements:

  • 1 CPU core (64-bit)

  • 30 MiB main memory

  • Approximately 100 MiB free space in usr/bin for Virtana Service Observability agent software

  • A network interface that supports TCP/IP and provides a minimum of 5 Mbps (megabits per second) upload capacity

  • Support for Advanced Encryption Standard (AES)

To install and manage the agent on a Linux host, you will need to meet the following software requirements:

  • A Linux distribution that supports Debian or Red Hat distribution packages

  • A login account with superuser privileges

  • Internet access with outbound TCP traffic through port 443

  • DNS support so you can reach your Virtana Service Observability API endpoint

To support Virtana tools, you will need to meet the following requirements:

  • Permission to download files at delivery.zenoss.io. You can contact the Virtana Support site to request this permission.

  • A Virtana Service Observability API authentication key.

  • The commands in the installation procedures use the Bash shell. Adjust as needed for other shells.

Download the distribution file

Perform the following steps to download the distribution file for the Virtana Service Observability agent.

  1. In a web browser, go to delivery.zenoss.io and log in to the Virtana Support Portal.

  2. In Virtana Delivery, locate Collector 2.0 and click View/Hide to view the available files for download.

  3. Download the latest file for the Debian-based or Red Hat-based systems. For example, download the zendatamon-agent_1.0.0_build278.deb file or the zendatamon-agent_1.0.0_build278-1.x86_64.rpm file. Note that the version number or build number might be different.

  4. If necessary, copy the file to the Virtana Service Observability agent host.

Install the Virtana Service Observability agent on Debian-based Linux hosts

Non-interactive installation

Perform the following steps to install (non-interactively) the Virtana Service Observability agent.

  1. Log in to the Virtana Service Observability agent host and change directory to the directory where you saved the service distribution file.

  2. Review and accept the license agreement for the Virtana Service Observability Agent Software. Example command:

    export ZENOSS_LICENSE_AGREEMENT="Y"

  3. In this step, a default configuration file for the selected datasources is placed in the /etc/zendatamon-configs directory. Optionally, you can add configuration files to this location later.

    Specify the list of datasources to enable. Replace <YOUR-PLUGINS> with a space-separated list of at least one of the following datasource names. The host-linux-device is the recommended minimum datasource.

    Example command:

    export ZENOSS_DATASOURCES="<YOUR-PLUGINS>"

  4. Specify your Virtana Service Observability API authentication key. Replace <YOUR-API-KEY> with a valid authentication key for your environment. Example command:

    export ZENOSS_API_KEY="<YOUR-API-KEY>"

  5. Specify your Virtana Service Observability API endpoint. Replace <YOUR-API-ENDPOINT> with the endpoint for your environment. Example command:

    export ZENOSS_API_ENDPOINT="<YOUR-API-ENDPOINT>:443"

  6. Start the installation and monitor the service startup. Example command:

    yum install -y ./zendatamon-agent*.rpm && journalctl -f -u zendatamon-agent

    The installation scripts enable and start the Virtana Service Observability agent. For more information about managing the service, see Managing the Virtana Service Observability agent on Linux.

Managing the Virtana Service Observability agent on Linux

You can manage the service with standard systemd utilities. To manage the datasources, edit their configuration files.

Manage the Virtana Service Observability agent service

Use the systemctl utility to start, stop, and manage the zendatamon-agent service. For example, to stop the service, enter the following command:

systemctl stop zendatamon-agent

To review the log file, use the journalctl command:

journalctl -f -u zendatamon-agent

Most of the user configuration properties in the configuration file for the Virtana Service Observability agent service are set when you install the service. The service configuration file is /etc/zendatamon-configs/agent.yaml. The agent service loads configuration file changes immediately.

In the following example file, the @lp(agent.defaultInterval) field sets the collection interval to 30 seconds.

yaml title="agent.yaml" apiVersion: v1 agent: name: zencollector source: host.example.com defaultInterval: 30s configurationSource: local: - name: "default local config" directory: "/etc/zendatamon-configs/configs" datasinks: - name: api.zenoss.io type: zenoss conf: address: api.zenoss.eu:443 apiKey: <YOUR_API_KEY> secretlookup: type: noop

Datasources

You can configure datasources in the host-linux-device datasource configuration file, if enabled. The Virtana Service Observability agent service loads configuration file changes immediately.

Datasources include:

The http datasource and the icmp configuration file are independent of the host-linux-device configuration file.

In this section: