Dell EMC Isilon (Commercial)
ZenPacks.zenoss.EMC.Isilon
The EMC Isilon ZenPack provides support for monitoring the Dell EMC Isilon storage platform. Discovery and monitoring are performed over HTTP using Isilon OneFS HTTP API, which provides the bulk of the discovery and monitoring functionality.
SNMP is optionally supported as well, although the scope of data available via SNMP is fairly limited by comparison.
The features added by this ZenPack can be summarized as follows. They are each detailed further below.
Simple provisioning for each Isilon cluster using IP address, port, and credentials
Auto-discovery of node devices via cluster modeling
Limited support for SNMP discovery and monitoring
Robust support for OneFS HTTP API
Event management and monitoring
Optional service impact with addition of Virtana Service Dynamics product
Optional debug mode provides analysis of OneFS API utilization
Support
This ZenPack is developed and supported by Virtana. Enterprise support is available to Virtana customers with an active subscription or support agreement. ZenPacks are available at delivery.zenoss.com. To request more information about this or any other ZenPack, contact Virtana.
Releases
Version 1.1.1
Released 2023/07/07
Requires PythonCollector ZenPack, ZenPackLib ZenPack (>=2.0.6), CalculatedPerformance ZenPack
Tested with Virtana Service Observability, Zenoss 6.7 and Service Impact 5.6.0, Analytics 6.0.0.
Version 1.1.0
Released 2022/03/17
Requires PythonCollector ZenPack, ZenPackLib ZenPack (>=2.0.6), CalculatedPerformance ZenPack
Tested with Virtana Service Observability, Zenoss 6.6.0 and Service Impact 5.5.5
Discovery
The following components will be automatically discovered through the Isilon Cluster IP address, port and credentials you provide. The properties and relationships will be continually updated on Zenoss' normal remodeling interval which defaults to every 12 hours.
IsilonCluster
Attributes: Node Count, Cluster State, Description, Encoding, Has Quorum, Compliance Mode, Virtual, vOneFS ESXi, Join Mode, Cluster IP, Cluster ID
Relationships: Endpoint, Quota, License, File Pool, Access Zone, Flexnet Pool, GroupNet, SubNet, Rule, Cluster Node, Protocol, SMB Share, NFS Export, NTP Server, NDMP Context, NDMP User, NDMP Session, HDFS Proxy User, HDFS Rack, SmartPool Tier, SmartPool Node, Cloud Pool, CloudAccount, Cloud Policy
IsilonNode
Attributes: Cluster ID, Node Name, Node Type, Node State, Local Device ID, Logical Node Number, Serial Number, Node Config ID, Description, Isilon Product Name, OneFS Build Version, Cluster
Relationships: Cluster Node, Fiber Channel Ports, ZenModel (platform) component relationships
NodeComponent
Attributes: Description, Node Device, LNN, Serial Number, Node Config ID, Isilon Product Name, OneFS Build Version
Relationships: Isilon Cluster, Isilon Node, SmartPool Node, SmartPool Tier
SmartTierPool
Attributes: Tier ID, Auto IO Optimize, Auto Manage Protection, Namespace Accel Enabled, Additional Directory Protection, Spillover Enabled, Spillover Target, Virtual Hot Spare Write Deny, Hot Spare Space Hidden, Hot Spare Reserved Drives, Hot Spare Limit Percent
Relationships: Isilon Cluster, SmartPool Node, Cluster Node
SmartNodePool
Attributes: L3 Cache Enabled, L3 Status, Manual, Protection Policy, Auto IO Optimize, Auto Manage Protection, Namespace Accel Enabled, Additional Directory Protection, Spillover Enabled, Spillover Target, Virtual Hot Spare Write Deny, Hot Spare Space Hidden, Hot Spare Reserved Drives, Hot Spare Limit Percent
Relationships: Isilon Cluster, SmartPool Tier, Cluster Node
Quota
Attributes: Type, Enforced, Snapshots, Container, Linked, Notifications, Threshold Includes Overhead, Ready
Relationships: Isilon Cluster
License
Attributes: Duration, Expiration, License Status
Relationships: Isilon Cluster
FilePool
Attributes: Default Policy
Relationships: Isilon Cluster
AccessZone
Attributes: Use Available Auth, Alternate Provider, Cache Size, Create Path, HDFS Authentication, HDFS Kerberos Keytab, HDFS Root Directory, Home Directory Umask, NetBIOS Name, Directory Path, Protocol Audit Enabled, Skeleton Directory, System Provider, WebHDFS Enabled, Zone ID
Relationships: Isilon Cluster, GroupNet, Flexnet Pool
FlexnetPool
Attributes: Description, Rebalance Policy, Unsuspend Delay, Connect Policy, Failover Policy
Relationships: Isilon Cluster, SubNet, Access Zone, GroupNet, Interface, Rule
GroupNet
Attributes: Name
Relationships: Isilon Cluster, Access Zone, SubNet, Flexnet Pool, Interface, Rule, IP Service
SubNet
Attributes: Name
Relationships: Isilon Cluster, Flexnet Pool, GroupNet, Interface, Rule
NetworkRule
Attributes: Description, Node Type
Relationships: Isilon Cluster, Cluster Interface, GroupNet, SubNet, Flexnet Pool
Protocol
Attributes: Description, Protocol
Relationships: SMB Share, NFS Export, NTP Server, NDMP Context, NDMP User, NDMP Session, HDFS Proxy User, HDFS Rack, Isilon Cluster
SMBShare
Attributes: Share Path
Relationships: Isilon Cluster, Protocol
NFSExport
Attributes: Name
Relationships: Isilon Cluster, Protocol
NTPServer
Attributes: Name
Relationships: Isilon Cluster, Protocol
NDMPContext
Attributes: Name
Relationships: Isilon Cluster, Protocol
NDMPUser
Attributes: Name
Relationships: Isilon Cluster, Protocol
NDMPSession
Attributes: Name
Relationships: Isilon Cluster, Protocol
HDFSProxyUser
Attributes: Name
Relationships: Isilon Cluster, Protocol
HDFSRack
Attributes: Name
Relationships: Isilon Cluster, Protocol
StorageEnclosure
Attributes: Configuration, Serial number, Model
Relationships: Isilon Node
FiberChannelPort
Attributes: Logical Network Node, Port ID, WWN, WWPN, Topology, Rate
Relationships: Isilon Node
HardDiskIsilon
Attributes: Zenoss Reference Attribute, Bay, Logical ID, Chassis ID, Device Name, Model, Serial, Firmware, Size
Relationships: Storage Enclosure
FanModule
Attributes: description
Relationships: Storage Enclosure
PowerSupply
Attributes: Firmware, Type
Relationships: Storage Enclosure
TemperatureSensor
Attributes: description
Relationships: Storage Enclosure
ClusterIpInterface
Attributes: NIC Name, IP Address
Relationships: Rule, Interface
NodeIpInterface
Attributes: Logical Node, status_health_value, severity_health_value, NIC Name, IP Address
Relationships: Flexnet Pool, SubNet, GroupNet, Cluster Interface
ClusterIpService
Attributes: Name, Port
Relationships: GroupNet
CloudPolicy
Attributes: Name
Relationships: Isilon Cluster, Cloud Pool
CloudAccount
Attributes: Account ID, Account Username, Birth Cluster ID, Cloud Protocol
Relationships: Isilon Cluster, Cloud Pool
CloudPool
Attributes: Description, Vendor, Birth Cluster ID, Cloud Protocol, Auto IO Optimize, Auto Manage Protection, Namespace Accel Enabled, Additional Directory Protection, Spillover Enabled, Spillover Target, Virtual Hot Spare Write Deny, Hot Spare Space Hidden, Hot Spare Reserved Drives, Hot Spare Limit Percent
Relationships: Isilon Cluster, CloudAccount, Cloud Policy
Endpoint
Attributes: URI
Relationships: Isilon Cluster
Monitoring
The following metrics will be collected every 5 minutes by default. The average statistic is collected, and the graphed value is per second for anything that resembles a rate.
IsilonClusterSNMP: Metrics: nodeCount, clusterHealth, clusterCPUUser, clusterCPUNice, clusterCPUSystem, clusterCPUInterupt, clusterCPUIdlePct, clusterNetworkInBytes, clusterNetworkOutBytes, clusterIfsInBytes, clusterIfsOutBytes, ifsTotalBytes, ifsUsedBytes, ifsAvailableBytes, ifsFreeBytes
IsilonClusterDevice: Metrics: cluster_cpu_count, cluster_cpu_idle_avg, cluster_cpu_user_avg, cluster_cpu_sys_avg, cluster_cpu_intr_avg, cluster_cpu_nice_avg, cluster_disk_bytes_out_rate, cluster_disk_bytes_in_rate
IsilonClusterNetworkTraffic: Metrics: cluster_net_ext_bytes_in_rate, cluster_net_ext_bytes_out_rate, cluster_net_ext_errors_in_rate, cluster_net_ext_errors_out_rate, cluster_net_ext_packets_in_rate, cluster_net_ext_packets_out_rate, cluster_net_int_bytes_in_rate, cluster_net_int_bytes_out_rate, cluster_net_int_errors_in_rate, cluster_net_int_errors_out_rate, cluster_net_int_packets_in_rate, cluster_net_int_packets_out_rate
IsilonClusterAggregateDisk: Metrics: filesystemStats, cluster_disk_xfer_size_in, cluster_disk_xfer_size_out, cluster_disk_xfers_in_rate, cluster_disk_xfers_out_rate
IsilonClusterDeduplication: Metrics: cluster_dedupe_estimated_deduplicated_bytes, cluster_dedupe_estimated_saved_bytes, cluster_dedupe_logical_deduplicated_bytes, cluster_dedupe_logical_saved_bytes, cluster_dedupe_total_physical_bytes, cluster_dedupe_total_used_bytes
IsilonClusterNodes: Metrics: cluster_node_count_all, cluster_node_count_diskless, cluster_node_count_down, cluster_node_count_readonly, cluster_node_count_smartfailed, cluster_node_count_up
IsilonNodeDevice: Metrics: node_uptime, node_cpu_count, node_cpu_idle_avg, node_cpu_user_avg, node_cpu_sys_avg, node_cpu_intr_avg, node_cpu_nice_avg, node_load_1min, node_load_5min, node_load_15min, node_memory_used, node_memory_free, node_open_files, node_process_count, node_disk_bytes_out_rate_avg, node_disk_bytes_in_rate_avg, norm_load_1min, norm_load_5min, norm_load_15min
IsilonNodeIFS: Metrics: node_ifs_bytes_deleted_rate, node_ifs_bytes_in_rate, node_ifs_bytes_out_rate, node_ifs_files_created_rate, node_ifs_files_removed_rate, node_ifs_num_lookups_rate, node_ifs_ops_in_rate, node_ifs_ops_out_rate, node_ifs_heat_write_total, node_ifs_journal_stats, abort_attempted_pct, commit_attempted_pct, flush_attempted_pct, btl_drain_attempted_pct, blocks_meta_attempted_pct, blocks_data_attempted_pct, drive_replay_attempted_pct, prepare_attempted_pct, node_ifs_ssd_bytes_avail, node_ifs_ssd_bytes_total
IsilonNodeNetworkTraffic: Metrics: node_net_ext_bytes_in_rate, node_net_ext_bytes_out_rate, node_net_ext_errors_in_rate, node_net_ext_errors_out_rate, node_net_ext_packets_in_rate, node_net_ext_packets_out_rate, node_net_int_bytes_in_rate, node_net_int_bytes_out_rate, node_net_int_errors_in_rate, node_net_int_errors_out_rate, node_net_int_packets_in_rate, node_net_int_packets_out_rate
IsilonNodeAggregateDisk: Metrics: node_disk_access_latency_avg, node_disk_access_slow_avg, node_disk_busy_avg, node_disk_iosched_latency_avg, node_disk_iosched_queue_avg, node_disk_xfer_size_in_avg, node_disk_xfer_size_out_avg, node_disk_xfers_in_rate_avg, node_disk_xfers_out_rate_avg
IsilonNodeClients: Metrics: node_clientstats_active_cifs, node_clientstats_active_ftp, node_clientstats_active_hdfs, node_clientstats_active_http, node_clientstats_active_irp, node_clientstats_active_jobd, node_clientstats_active_lsass_out, node_clientstats_active_nfs, node_clientstats_active_nfs3, node_clientstats_active_nfs4, node_clientstats_active_nlm, node_clientstats_active_papi, node_clientstats_active_siq, node_clientstats_active_smb1, node_clientstats_active_smb2, node_clientstats_connected_cifs, node_clientstats_connected_ftp, node_clientstats_connected_hdfs, node_clientstats_connected_http, node_clientstats_connected_ndmp, node_clientstats_connected_nfs, node_clientstats_connected_nlm, node_clientstats_connected_papi, node_clientstats_connected_siq, node_clientstats_connected_smb
IsilonNodeNFS: Metrics: svc_counters, v3_counters, v4_counters, ccb, icb, replay_tcp, replay_udp, sec_principal, sec_sid, sec_uid_gid, sec_username, v4_dircache
IsilonNodeSNMP: Metrics: nodeHealth, nodeCPUUser, nodeCPUNice, nodeCPUSystem, nodeCPUInterrupt, nodeCPUIdle, nodeNetworkInBytes, nodeNetworkOutBytes, nodeIfsInBytes, nodeIfsOutBytes
SmartPool: Metrics: usage
Endpoint: Metrics: GET, PUT, POST, DELETE, HEAD, UNSUPPORTED
Quota: Metrics: usage
NodeIpInterface: Metrics: health, node_net_iface_bytes_in_rate, node_net_iface_bytes_out_rate, node_net_iface_packets_in_rate, node_net_iface_packets_out_rate, node_net_iface_errors_in_rate, node_net_iface_errors_out_rate
Protocol: Metrics: protostats
ProtocolSNMP: Metrics: protocolOpCount, inAvgBytes, inStdDevBytes, inBitsPerSecond, outAvgBytes, outStdDevBytes, outBitsPerSecond, latencyAverage, latencyStdDev
ProtocolSMB: Metrics: sessions, openfiles
ProtocolHDFS: Metrics: proxyusers
ProtocolNFS: Metrics: nlm_locks, nlm_waiters
ProtocolNDMP: Metrics: sessions
FileSystem: Metrics: node_sysfs_bytes_avail, node_sysfs_percent_avail, availBlocks, usedBlocks
HardDiskIsilon: Metrics: health, node_disk_xfers_in_rate_all, node_disk_xfers_out_rate_all, node_disk_xfer_size_in_all, node_disk_xfer_size_out_all, node_disk_bytes_in_rate_all, node_disk_bytes_out_rate_all, node_disk_busy_all, node_disk_access_latency_all, node_disk_access_slow_all, node_disk_iosched_queue_all, node_disk_iosched_latency_all, node_disk_ifs_bytes_total_all, node_disk_ifs_bytes_free_all, node_disk_ifs_inodes_used_all
HardDiskIsilonSNMP: Metrics: diskPerfOpsPerSecond, diskPerfInBitsPerSecond, diskPerfOutBitsPerSecond
FanModule: Metrics: node_sensor_fan_rpms
FanModuleSNMP: Metrics: fanSpeed
PowerSupply: Metrics: node_sensor_power_watts
PowerSupplySNMP: Metrics: powerSensorValue
TemperatureSensor: Metrics: node_sensor_temp_celsius
TemperatureSensorSNMP: Metrics: tempSensorValue
Event Management
A monitoring plugin collects events detected by the Isilon cluster and mirror events displayed in the OneFS HTTP web interface.
Service Impact
When combined with the Virtana Service Dynamics product, this ZenPack adds built-in service impact and root cause analysis capabilities for services running on EMC Isilon. The service impact relationships shown in the diagram and described below are automatically added. These will be included in any services that contain one or more of the explicitly mentioned components.
Service Impact Relationships
IsilonCluster impacts related Quota, License, FilePool, AccessZone, FlexnetPool, GroupNet, SubNet, NetworkRule, SmartTierPool, SmartNodePool, CloudPool
IsilonCluster impacts related CloudAccount, CloudPolicy, Protocol, Endpoint
IsilonNode impacts related IsilonCluster, NodeComponent, SmartNodePool, SmartTierPool, NodeIpInterface, StorageEnclosure, FileSystem, FiberChannelPort
StorageEnclosure impacts related FanModule, HardDiskIsilon, PowerSupply, TemperatureSensor
SmartTierPool impacts related NodeComponent, SmartNodePool
SmartNodePool impacts related NodeComponent
AccessZone impacts related GroupNet, FlexnetPool
NetworkRule impacts related FlexnetPool, GroupNet
GroupNet impacts related FlexnetPool
SubNet impacts related FlexnetPool
NodeIpInterface impacts related FlexnetPool, GroupNet
FlexnetPool impacts related GroupNet
GroupNet impacts related SubNet
NetworkRule impacts related SubNet
NodeIpInterface impacts related SubNet
NetworkRule impacts related ClusterIpInterface
Protocol impacts related SMBShare, NFSExport, NTPServer, NDMPContext, NDMPUser, NDMPSession, HDFSProxyUser, HDFSRack
NodeIpInterface impacts related ClusterIpInterface
ClusterIpInterface impacts related Protocol
ClusterIpService impacts related GroupNet
CloudPolicy impacts related CloudPool
CloudAccount impacts related CloudPool
Usage
Adding Isilon Clusters
Use the following steps to start monitoring an Isilon cluster using the web interface.
Navigate to Infrastructure tab in the web interface
Select the "Add EMC Isilon Cluster" option from the Add Device drop-down menu
Specify the IP Address, Username, Password and optionally the Port and SSL fields if your cluster is not using the default values
Click Add.
A device representing the Isilon cluster will be added to the /Devices/Storage/EMC/Isilon device class
After modeling, the title of the cluster will reflect the configured cluster name.
A device class (/Devices/Storage/EMC/Isilon/[CLUSTER_NAME]) and willcontain discovered node devices
Node device ids will follow the [CLUSTER_NAME]-lnn-[NODE_ID] convention
Configuring optional SNMP Monitoring
SNMP discovery and monitoring is disabled by default, since most of its data is available via HTTP. To use SNMP monitoring, set the zSnmpMonitorIgnore zProperty to False at either the Device Class or Device level. Please note that each node must have its own externally available IP address in order for SNMP monitoring to function
Configuring Debug Mode
Debug Mode can be enabled by setting the zEMCIsilonDebugMode property to True on the device class or Isilon cluster device. Debug Mode provides additional monitoring of the API usage itself, creating components that represent available URI endpoints. Collected metrics include counts for HTTP transactions against each URI by type (GET, POST, PUT, etc). Because this adds overhead to an already monitored system, these components are disabled by default and must be enabled by the user (component grid Monitoring dialog). Debug mode is intended to assist with identifying potential bottlenecks and query inefficiencies caused either by this ZenPack or by other applications utilizing the OneFS HTTP API.
Command Line Tools
Several scripts are included for use with troubleshooting or sample data collection. These scripts reside in the $ZENPACK/ZenPacks/zenoss/EMC/Isilon/utilities directory and calling --help will display usage information for each
collect-samplesPerforms iterative walk through API collecting as much as it can.
collect-statistics-keysNarrowed focus on statistics and available keys for use in URI endpoints.
collect-statisticsPerforms a metric collection query and returns the JSON output.
check-authorizationDisplays configured permissions for the authenticating user.
Isilon Cluster Networking Considerations
Currently, modeling of the Isilon cluster environment (including the nodes) is conducted using the Cluster IP address. This is so that IP configuration changes to nodes can be updated even in cases where a node no longer has an external IP.
Please note that IP address changes that take place will be updated when the Cluster device is remodeled (not the Node device).
For performance data collection, queries are conducted on a randomly selected external IP address belonging to either the cluster or one of the nodes. If a SmartHost IP is used as the host when initially adding the Cluster, then the SmartHost IP will be included in this selection.
Monitoring of the Isilon cluster and its nodes is designed with the expectation that each node will have at least one external IP interface that is accessible for monitoring.
Although version 1.0.1 removes this requirement (nodes can now be modeled/monitored without an external interface), it should still be considered a strong recommendation since monitoring multiple nodes against a single IP address could impact monitoring performance and/or reliability.
Operating with a small pool of IPs against a larger number of nodes means that API queries (used by this ZenPack) for each node, in addition to the cluster itself, will be directed at a subset of the nodes for the cluster. The zEMCIsilonHttpPoolSize zProperty has been introduced (version 1.0.1) and may ameliorate this concern by limiting the number of simultaneous API queries.
The EMC Isilon documentation seems to support this perspective in that it recommends a scaling formula for determining the number of IP Addresses that should be made available depending on the size of a cluster:
For example, the "Isilon External Network Connectivity Guide" recommends a total of 19 IP addresses (divided into pools) for a 3-node cluster.
One additional thing to note is that the optional SNMP monitoring will not work without at least one external IP address assigned to each node.
OneFS API Minimally Privileged User
Certainly the default "admin" account privileges are more than sufficient for this ZenPack.
Security concerns (such as API write access for the admin user), however, make the creation of a separate "monitoring" User/Role a good idea, and we strongly recommend it.
Performance may also be improved by using a minimally configured account, since API calls with read/write access uses two client connections (according to the "isi statistics client" command output) instead of just one.
Fortunately, the creation of a Role with the needed Privileges is straightforward and can be done from the Isilon Admin UI.
The list of (read) permissions consists of:
Platform API
Auth
CloudPool
Cluster
Devices
Event
FTP
HDFS
HTTP
NDMP
Network
NFS
NTP
Quota
SmartPools
SMB
SNMP
Statistics
Namespace Access
Namespace Traverse
Creating a Role with this list of Privileges and assigning a User to this Role will be sufficient for the ZenPack's monitoring requirements.
Installed Items
Installing this ZenPack will add the following items to your Virtana system.
Device Classes
/Storage/EMC/Isilon
Configuration Properties
zEMCIsilonHttpPort
zEMCIsilonUseSSL
zEMCIsilonUser
zEMCIsilonPassword
zEMCIsilonHttpTimeout
zEMCIsilonHttpPageSize
zEMCIsilonHttpPoolSize
zEMCIsilonDebugMode
Modeler Plugins
EMC.Isilon.http.IsilonClusterMap
EMC.Isilon.http.IsilonNodeMap
EMC.Isilon.snmp.IsilonNodeMap
Datasource Types
Isilon Datasource (HTTP)
Isilon Events Datasource (HTTP)
SNMP Datasource (SNMP)
Monitoring Templates
IsilonCluster
IsilonClusterSNMP
IsilonClusterDevice
IsilonClusterNetworkTraffic
IsilonClusterAggregateDisk
IsilonClusterDeduplication
IsilonClusterNodes
IsilonNode
IsilonNodeDevice
IsilonNodeIFS
IsilonNodeNetworkTraffic
IsilonNodeAggregateDisk
IsilonNodeClients
IsilonNodeNFS
IsilonNodeSNMP
SmartPool
Endpoint
Quota
License
LicenseSNMP
FilePool
AccessZone
FlexnetPool
GroupNet
SubNet
NetworkRule
NodeIpInterface
Protocol
ProtocolSNMP
ProtocolSMB
ProtocolHDFS
ProtocolNFS
ProtocolNTP
ProtocolNDMP
ProtocolFTP
ProtocolHTTP
ProtocolSYNCIQ
StorageEnclosure
FileSystem
FiberChannelPort
HardDiskIsilon
HardDiskIsilonSNMP
FanModule
FanModuleSNMP
PowerSupply
PowerSupplySNMP
TemperatureSensor
TemperatureSensorSNMP
CloudPolicy
CloudAccount
CloudPool
Device Types
IsilonCluster (in /Storage/EMC/Isilon)
IsilonCluster (in /Storage/EMC/Isilon/CLUSTER_NAME)
Component Types
NodeComponent
SmartTierPool
SmartNodePool
Quota
License
FilePool
AccessZone
FlexnetPool
GroupNet
SubNet
NetworkRule
Protocol
SMBShare
NFSExport
NTPServer
NDMPContext
NDMPUser
NDMPSession
HDFSProxyUser
HDFSRack
StorageEnclosure
FileSystem
FiberChannelPort
HardDiskIsilon
FanModule
PowerSupply
TemperatureSensor
ClusterIpInterface
NodeIpInterface
ClusterIpService
CloudPolicy
CloudAccount
CloudPool
Endpoint
Event Classes
/Status/Isilon
/Perf/Isilon
Required Daemons
Type | Name |
|---|---|
Modeler | zenmodeler |
Performance Collector | zenpython |
Virtana Analytics
In Analytics 6.0.0, any third-party reporting tool can be used to generate reports.
Upgrade
The EMC Isilon Zenpack can be upgraded. To upgrade the ZenPack, install the latest version over the existing one. There is no action for the user to migrate the data. The performance data and events of old ZenPack are retained as per the retain policy settings.
Known Issues
ANA-386 - CreateDimmTables() Return Error When rrddata_source Processing.
Note
These steps are applicable only for Virtana Analytics 5.x.x.
To solve this issue follow instructions according this article: ANA-386 - CreateDimmTables() Return Error When rrddata_source Processing
Changes
1.1.1
Changed Quotas name to be defined as path (ZPS-8188)
Added compatibility with Analytics 6.0.0.
Tested with Virtana Service Observability, Zenoss 6.7 and Service Impact 5.6.0, Analytics 6.0.0.
1.1.0
Added support API for OneFS 8.2.x, 9.0.0.0, 9.1.0.0 (ZPS-6907)
Tested with Virtana Service Observability, Zenoss 6.6.0 and Service Impact 5.5.5
1.0.4
ZenPack does not cause issues with building dim tables in Analytics (ZPS-3594)
1.0.3
Datapoints are now unique, preventing values from mashing and being overwriten (ZPS-7171)
1.0.2
Correct zenbatchdump output (ZPS-2900)
IpInterface method override output corrected (ZPS-6182)
Reduce logging verbosity (ZPS-4975)
Tested with Zenoss 6.4.1, Virtana Service Observability with and Service Impact 5.5.1
1.0.1
Allow monitoring of nodes without external IP (reservations noted above) (ZPS-3910)
Added "zEMCIsilonHttpPoolSize" zProperty to restrict simultaneous client connections
Updated icons to improve visibility in Cloud Zenoss
Handling of "Infinity" and "nan" output values (ZPS-3459)
Improved support for Cloud Zenoss (ZPS-3801)
Refactored and simplified utility scripts (ZPS-3787)
Added support for ISICSRF cookies (ZPS-4391)
Corrected plural of "Cloud Policy" in component list (ZPS-4648)
Fix flare message on Cluster IP Service components (ZPS-4645)
Fix FileSystem component grid display issues (ZPS-4649)
Fix warnings about Datapoint Alias length during installation (ZPS-4646)
Improved detail in error/warning logging (HTTP status and return messaging)
Improved data collection performance by consolidation of tasks using session pools
Documentation updated with notes about cluster IP allocation and user/role/privilege configuration
Tested with Virtana Service Observability, Virtana Service Dynamics 6.2.1 and 5.3.3
1.0.0
Initial release.