Juniper NetScreen
ZenPacks.zenoss.NetScreenMonitor
This ZenPack monitors Juniper NetScreen devices using the SNMP v2 protocol.
This ZenPack provides overall statistics for
interfaces
routes
vpn tunnels
Support
This ZenPack is developed and supported by Virtana. Enterprise support is available to Virtana customers with an active subscription or support agreement. ZenPacks are available at delivery.zenoss.com. To request more information about this or any other ZenPack, contact Virtana.
Releases
Version 2.2.3
Released on 2017/01/12
Compatible with Virtana Service Dynamics 4.2.5 - 5.1.x
Summary of Changes:
Add monitoring and locking to VPN tunnels
Version 2.2.2
Released on 2016/09/16
Compatible with Virtana Service Dynamics 4.2.5 - 5.1.x
Summary of Changes:
Add common datapoint aliases
Version 2.2.1
Released on 2015/11/10
Compatible with Virtana Service Dynamics 4.2.5 - 5.1.x
Summary of Changes:
Add total memory modeling
Adjust free memory thresholds
Add common datapoint aliases
Devices Monitored
This ZenPack monitors devices from Juniper's NetScreen line of products. Models supported include:
Juniper SSG-140 version 6.2.0, Firewall+VPN
Juniper SSG-140 version 6.3.0, Firewall+VPN
Juniper SSG-320M version 6.3.0, Firewall+VPN
Juniper SSG-550 version 6.2.0, Firewall+VPN
Juniper SSG-550 version 6.3.0, Firewall+VPN
Juniper SSG20 version 6.2.0, Firewall+VPN
Juniper SSG20-WLAN version 6.3.0, Firewall+VPN
Juniper SSG5-Serial version 6.3.0, Firewall+VPN
Juniper SRX1500 internet router, kernel JUNOS 15.1X49-*
NetScreenISG 1000 version 6.3.0, Firewall+VPN
NetScreenISG 2000 version 6.3.0, Firewall+VPN
Modeler Plugins
snmp.netscreen.NetScreenDeviceMap
zenoss.snmp.DeviceMap
snmp.netscreen.InterfaceMap
zenoss.snmp.RouteMap
NetScreenVPN
Datasource Types
SNMP
Monitoring Templates
NetScreenDevice
VPNTunnel
netscreenInterface
Device
Datapoints: (Format: [datasource.point: DatasourceType.DataPointType]):
cpuAvg.cpuAvg: SNMP.Gauge
cpuLast1Min.cpuLast1Min: SNMP.Gauge
cpuLast5Min.cpuLast5Min: SNMP.Gauge
cpuLast15Min.cpuLast15Min: SNMP.Gauge
freeMemory.freeMemory: SNMP.Gauge
sessAllocate.sessAllocate: SNMP.Gauge
sessMaximum.sessMaximum: SNMP.Gauge
usedMemory.usedMemory: SNMP.Gauge
Components
The following components are monitored:
Interfaces
Datapoints: (Format: [datasource.point: DatasourceType.DataPointType]):
ifHCInOctets.ifHCInOctets: SNMP.Derive
ifHCInUcastPkts.ifHCInUcastPkts: SNMP.Derive
ifHCOutOctets.ifHCOutOctets: SNMP.Derive
ifHCOutUcastPkts.ifHCOutUcastPkts: SNMP.Derive
ifInOctets.ifInOctets: SNMP.Derive
ifInUcastPackets.ifInUcastPackets: SNMP.Derive
ifOutOctets.ifOutOctets: SNMP.Derive
ifOutUcastPackets.ifOutUcastPackets: SNMP.Derive
Graphs:
Throughput
Packets
Errors
Thresholds:
High Utilization
ifOperStatusChange
Network Routes
Network Routes are provided by the native zenoss.snmp.RouteMap modeler plugin and link to the Virtana networking/routing facility.
Properties:
Interface Description
Address/Mask
Device
Interface
Mac Address
Ping Status
SNMP Status
VPN Tunnels
Datapoints: (Format: [datasource.point: DatasourceType.DataPointType]):
avail.avail: SNMP.Gauge
bytesIn.bytesIn: SNMP.Counter
bytesOut.bytesOut: SNMP.Counter
delayAvg.delayAvg: SNMP.Gauge
inSpi.inSpi: SNMP.Counter
monState.monState: SNMP.Gauge
outSpi.outSpi: SNMP.Counter
p1State.p1State: SNMP.Gauge
p2State.p2State: SNMP.Gauge
packetsIn.packetsIn: SNMP.Counter
packetsOut.packetsOut: SNMP.Counter
tunnelState.tunnelState: SNMP.Gauge
Graphs:
Throughput
Packets
SPI
Thresholds:
Phase 1 Inactive
Phase 2 Inactive
Tunnel Down
ZenPack Installation
Install the NetScreenMonitor ZenPack as per Virtana Service Dynamics documentation
Restart all required Virtana Services as per Virtana Service Dynamics documentation
Install the target device, as follows:
Manual Target Device Installation
Navigate to the Infrastructure and hit the + button to add a device
Fill in the following entries:
Hostname or IP Address
Device Class: /Network/NetScreen
Title
Click "More" and fill in the following entries:
Snmp Community
Snmp Port (defaults to 161)
Click Add
Ensure zenperfsnmp is running
Navigate to Graphs and you should see some placeholders for graphs. After approximately fifteen minutes you should see the graphs start to become populated with information.
Batch Target Installation with zenbatchload
You can also add your devices in batch for convenience and automation.
Create a text file (filename: /tmp/netscreen.txt). Each server has an entry similar to:
/Devices/Network/NetScreen netscreen setManageIp='10.1.1.1', \ zSnmpCommunity='public', \ zSnmpVer='v2c'Run the command on the terminal:
zenbatchload /tmp/netscreen.txt
Model the Component
From the device view, select Model Device from the gear menu.
Changes
2.2.3
Add monitoring and locking to VPN tunnels (ZPS-603)
2.2.2
Add common datapoint aliases (ZEN-24619)
2.2.1
Add total memory modeling
Change free memory threshold to 10% of total
Add common datapoint aliases (ZEN-24619)