Aruba Integration Service

This ZenPack is to monitor Aruba Network Devices and retrieve information about the Access Points, Radios, and Clients connected to them. Base hardware components(in case they are accessible) are available as well: Fan, Storage, Processor, Memory, Power Supply.

After satisfying the dependency requirements above, install the ZenPack via the command line as per the Virtana Service Dynamics Admin Guide matching your Virtana Service Dynamics version.

These Device Classes are added for Devices:

(/Network/Aruba/Controller)

For standalone Aruba Controllers, the following items are modeled as components:

(/Network/Aruba/Instant)

Rather than using a standalone controller, the Aruba Instant series selects one of the Access Points in the network to be a Virtual Controller. This AP then provides configuration and monitoring for the network. Note that Access Points that are not currently selected as the Virtual Controller provide much less data, none about other devices. However, if the Virtual Controller changes this will be detected on the next modeling of the devices.

(/Network/Aruba/AMPSwitch)

For standalone Aruba AMP Switches, the following items are modeled as components:

(/Network/Aruba/HPSwitch)

For standalone Aruba HP Switches, the following items are modeled as components:

These device classes don't provide specific metrics for AMS/CPPM devices, however templates from parent device classs can be leveraged.

2.1.1

2.1.0

2.0.0

1.0.0