Skip to main content

Set SNMP Trap Settings

  1. From the Settings tab, click SNMP Traps to access the SNMP Trap Settings page.

  2. Enter the following information in the SNMP Trap Settings page:

    Table 40. SNMP Settings for Version 2

    Field

    Definition

    Destination Hostname

    Hostname of the SNMP trap destination.

    Port

    Port used for SNMP trap communication.

    Community String

    SNMP community string value (alphanumeric). This field is optional.

    SNMP Version

    SNMP version to be used is v2c.

    Send Alarm Notifications to this SNMP Receiver

    Check box on by default.

    Send IPM Health Notifications to this SNMP Receiver

    Check box on by default.



    Table 41. SNMP Settings for Version 3

    Field

    Definition

    Destination Hostname

    Hostname of the SNMP trap destination.

    Port

    Port used for SNMP trap communication.

    SNMP Version

    Available SNMPv3 versions are:

    - v3 No Auth No Privacy

    - v3 Auth No Privacy

    - v3 Auth Privacy

    Username

    A user id, such as community, which is required to be defined in SNMPv3.

    SNMP Auth Password

    Password administering the Authentication Protocol.

    SNMP Auth Protocol

    Protocol defined to ensure the identity of users. Supported protocols are: MD5 and SHA.

    SNMP Privacy Password

    Password administering the Privacy Protocol.

    SNMP Privacy Protocol

    Protocol defined to allow for encryption of SNMPv3 messages that ensure confidentiality of data. Supported protocols are: AES and DES.

    Send Alarm Notifications to this SNMP Receiver

    Check box on by default.

    Send IPM Health Notifications to this SNMP Receiver

    Check box on by default.



  3. Click Save to save the settings.

  4. Click Close to return to the Settings page.